NanoBracket – Holder for Nanostation – Manufacturer of Wireless Network Products

Installation Procedure

In the first step, insert ball hinge into the hole of the holder NanoBracket™ .
Put one half of NanoBracket™ ’s body between holds that are placed on NanoStation from UBNT
Put flat end of the part “ball” to free space between the body of NanoStation and body of NanoBracket™ .
Cover it all by the second half of NanoBracket™ ’s body in order to assure fixed connection of NanoStation’s and NanoBracket™ ’s bodies.
Both parts secure by using screws.

At the beginning, put U-bolt on pole or console and insert the part of the NanoBracket™ called “bearing (base) for ball” into it.
Consequently, put the NanoStation with mounted body of NanoBracket™ on U-bolt.
The whole entity pulls by using nut under which we put saddles. In the meantime screw nut only temporarily in order to be able to set the NanoStation in required direction.
When the NanoStation is set you can pull nuts to the end. Now, installation of the NanoStation on pole or console by using mounting kit NanoBracket™ is completed.

First, put screws M6 to holes in the part of NanoBracket™ called “bearing (base) for ball”.
Put wall plugs to the wall and screw bearing (base) for ball tight to wall by using screws.
Consequently, put the NanoStation with mounted NanoBracket™ on it on screws.
The whole entity pulls by using nut under which we put saddles. In the meantime screw nut only temporarily in order to be able to set the NanoStation in required direction.
When the NanoStation is set you can pull nuts to the end. Now, installation of the NanoStation on wall by using mounting kit NanoBracket™ is completed.